SHROUDS

Wire
Top End
Bottom End
Length

1/8” 1x19
Nico pressed loop w/thimble
Swaged marine eye
12’ 10-1/2” (measured bearing point to bearing point)

FORESTAY

Wire
Top End
Bottom End
Length

1/8” 1x19
Nico pressed loop w/thimble
Swaged aircraft eye
13’ 5-1/2” (measured bearing point to bearing point)

JIB HALYARD

Wire
Top End
Bottom End
Adjusters

Length
Tail

1/8” 7x19
RL382BWL shackle, swaged ball w/shank
Nico pressed loop (no thimble)
Three (3) swaged balls w/shank spaced 1-1/4” apart with topmost baIl 5-1/2” above end of nico pressed loop.
14’ 3-3/4” (measured from end of lower loop to top of upper swage ball).  14’x5/32” Prestretch line attached to loop with two bungee clips (crimps).

MAIN HALYARD

Wire
Top End
Bottom End
Length
Tail

3/32” 7x19
RL382AWL shackle, swaged ball w/shank.
Nico pressed loop (no thimble).
7” (measured from bearing point to nico sleeve to top of upper swage ball).
37’ x 5/32” Prestretch line attached to loop with two bungee clips (crimps).

40’ x 5/32” Prestretch line

BOOM FITTINGS

QTY.

PART NO.

DESCRIPTION

1

DM275

Boom tube, 8’O”

1

D6560

Outhaul cap

3

DH312

Bail

1

D355

Gooseneck assembly (includes casting, universal, fork, spring & washer)

2

HARO21

Mainsheet block

1

HAR233

Mini cheek block

1

CL21 1

Clamcleat

2

RF628

yang block w/ cleat

1

RF 188

vang block

CLUB FJ LINE LENGTHS

Cunningham
Boom Vang
Outhaul
Center Board Lifter (2)
Center Board Bungees
Mainsheet
Jib Sheet
Spinnaker Sheet
Topping Lift
Foreguy/Downhaul
Hiking Strop Tie-ins (8)
Hiking Strap Bungees
Rudder Lifting Line
Rudder Downhaul

4’
14’
10’
7’
34”
30’

50’
26’
5’
30”
18”
5”
2”+ 3”

5/32” Prestretch
1/4” Prestretch
5/32” Prestretch
3/1 6” Trophy braid
1/4” Polypro shock cord
3/8” Trophy braid
3/8” Trophy braid
1/4” Prestretch or spectra
1/4” Prestretch or spectra
5/1 6” Polypro shock cord
3/1 6” Prestretch
5/32” Polypro shock cord
3/1 6” Trophy braid
1/4” Trophy braid 1’-1/4” Polypro shock cord (crimped into loop)

HIKING STRAP LENGTHS (Note: 2” strap)

Crew Straps
Skipper Straps

37”
30”
(Cut length only – before folding ends over for grommets)

Grommet both ends
Grommet both ends

HALYARD TAILS

Main Halyard Tail
Jib Halyard Tail
 

37’
14’
 

5/32” Prestretch
5/32” Prestretch
 

RUBRAIL

SMBT1

30’

Black P.V.C rubrail