//
Club FJ Specifications

CLUB FJ SPECIFICATIONS

Documents available as a PDF file by clicking below
Boom Fittings & Line Lengths Standing Rigging and Halyards

Standing Rigging and Halyards
SHROUDS
Wire Top End Bottom End Length 1/8″ 1×19 Nico pressed loop w/thimble Swaged marine eye 12′ 10-1/2″ (measured bearing point to bearing point)
FORESTAY
Wire Top End Bottom End Length 1/8″ 1×19 Nico pressed loop w/thimble Swaged aircraft eye 13′ 5-1/2″ (measured bearing point to bearing point)
JIB HALYARD
Wire Top End Bottom End AdjustersLength Tail 1/8″ 7×19 RL382BWL shackle, swaged ball w/shank Nico pressed loop (no thimble) Three (3) swaged balls w/shank spaced 1-1/4″ apart with topmost baIl 5-1/2″ above end of nico pressed loop. 14′ 3-3/4″ (measured from end of lower loop to top of upper swage ball).  14’x5/32″ Prestretch line attached to loop with two bungee clips (crimps).
MAIN HALYARD
Wire Top End Bottom End Length Tail 3/32″ 7×19 RL382AWL shackle, swaged ball w/shank. Nico pressed loop (no thimble). 7″ (measured from bearing point to nico sleeve to top of upper swage ball). 37′ x 5/32″ Prestretch line attached to loop with two bungee clips (crimps).
SPINNAKER HALYARD
Length 40′ x 5/32″ Prestretch line

Boom Fittings & Line Lengths
BOOM FITTINGS
QTY.
PART NO.
DESCRIPTION
1 DM275 Boom tube, 8’O”
1 D6560 Outhaul cap
3 DH312 Bail
1 D355 Gooseneck assembly (includes casting, universal, fork, spring & washer)
2 HARO21 Mainsheet block
1 HAR233 Mini cheek block
1 CL21 1 Clamcleat
2 RF628 vang block w/ cleat
1 RF 188 vang block
CLUB FJ LINE LENGTHS
Cunningham
Boom Vang
Outhaul
Center Board Lifter (2)
Center Board Bungees
Mainsheet
Jib Sheet
Spinnaker Sheet
Topping Lift
Foreguy/Downhaul
Hiking Strop Tie-ins (8)
Hiking Strap Bungees
Rudder Lifting Line
Rudder Downhaul		 4′ 14′ 10′ 7′ 34″ 30’50’ 26′ 5′ 30″ 18″ 5″ 2″+ 3″ 5/32″ Prestretch 1/4″ Prestretch 5/32″ Prestretch 3/1 6″ Trophy braid 1/4″ Polypro shock cord 3/8″ Trophy braid 3/8″ Trophy braid 1/4″ Prestretch or spectra 1/4″ Prestretch or spectra 5/1 6″ Polypro shock cord 3/1 6″ Prestretch 5/32″ Polypro shock cord 3/1 6″ Trophy braid 1/4″ Trophy braid 1′-1/4″ Polypro shock cord (crimped into loop)
HIKING STRAP LENGTHS (Note: 2″ strap)
Crew Straps
Skipper Straps		 37″ 30″ (Cut length only – before folding ends over for grommets) Grommet both ends Grommet both ends
HALYARD TAILS
Main Halyard Tail
Jib Halyard Tail		 37′ 14′ 5/32″ Prestretch 5/32″ Prestretch
RUBRAIL
SMBT1 30′ Black P.V.C rubrail

Comments are closed.